YOUR SOURCE FOR PREVIOUSLY ENJOYED
ELECTRONIC SIGNS & AFTER MARKET PARTS.
(Click on a tab below to switch store departments. The GREEN tab is the department you're in now.)
Rollsign Department
You're in the Electronic Signs, Parts and Accessories Department
Apparel & Clothing Department
Collectables / Novelties Department
All the equipment for sale below, unless otherwise stated, are second-hand used items.
All items sold have been pre-tested, and do work as designed, prior to shipment.
NOTE: The availablility of any signs, sign components, hardware items, or microchips is dependant on what can be
obtained. Gaps in what's available for purchase here may occur. Please e-mail any requests to check for availability first.
Exit Transit Store - Return to Rollsign Gallery
DVDs & Media Department
How Do I Pay?
Luminator GTI MegaMAX Full size front sign
This full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign
system. Its physical size is 73w x 6d x 13h inches and weighs about 48 pounds. It uses four Molex pin
and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply power
to the sign, and one 4-pin to supply power from the sign to the ODK
(sold separately).
Email for Prices, and Shipping & Processing.
LUMINATOR Products - GTI MAX Series:
F R E Q U E N T L Y   A S K E D   Q U E S T I O N S :

Q: Do you have the software to program these signs available for sale?
A: I do have the software for these signs, BUT because of Copyright restrictions, I am NOT LEGALLY PERMITTED to sell or give away copies of
it. If you would like to get your own copy of the Luminator software, please contact Luminator directly, at (972) 424-6511. Ask for the "Luminator
IPS" software.

PLEASE NOTE: FOR ASSISTANCE ON PROGRAMMING YOUR LUMINATOR or VULTRON TransDOT GENERATION 2 SIGN SYSTEMS,
Please scroll down to the bottom of this page for further information, or e-mail for details.

Q: Do you have _________ model sign available? I don't see it on the website.
A: All the assembled system signs I currently have available for sale are shown here. If it's flagged "
OUT OF STOCK", I do not have it right now.
(In addition, the signs displayed on the "Electronic Sign Gallery" page are part of my personal permanent collection, and are also not for sale.)
Testimonials for Luminator Sign Programming:
Jake J.,  Marshfield, MO
(Hover over or tap each thumbnail image to enlarge)
NUMBER
AVAILABLE:

0
Luminator GTI MAX Front sign
This full matrix flip-dot sign has a display of 7 x 90 pixels and contains the memory for the sign
system. Its physical size is 56.5w x 7d x 10.5h inches and weighs about 30 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK
(sold separately).
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
Luminator GTI MAX Side sign - Small
This full matrix flip-dot sign has a display of 7 x 75 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
Luminator GTI MAX Side sign - Full
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator GTI MAX Rear sign - Window Mount
This full matrix flip-dot sign has a display of 7 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 20w x 7d x 10.5h inches and weighs about
14 pounds. It uses two Molex pin and socket 'quick disconnect' wire connectors: One 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
LUMINATOR Products - MAX 2000 Series:
(Hover over or tap each thumbnail image to enlarge)
Luminator MegaMAX 2000 Full size front sign
This larger full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign system.
Its physical size is 73w x 7d x 13h inches and weighs about 49 pounds. It uses two thermoplastic 211401-1
threaded 7-pin panel mount connectors which supplies both power and data throughout, and a thermoplastic
206705-1 threaded 9-pin panel mount connector which supplies power and data to the ODK
(sold separately).
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator GTI "MINI" MegaMAX front sign
This full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign
system. Its physical size is 50w x 7d x 10.5h inches and weighs about 34 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK
(sold separately).
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 2000 Side sign
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
20 pounds. It uses two nylon 7-pin free hanging receptacle connectors which supplies both power and
data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 2000 Rear sign - Body Mount
This full matrix flip-dot sign has a display of 7 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs about
13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector which
supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
LUMINATOR Products - MAX 3000 Series:
(Hover over or tap each thumbnail image to enlarge)
Luminator MegaMAX 3000 Full size front sign
This larger full matrix flip-dot sign has a display of 16 x 112 pixels. This sign is a slave unit and
does
NOT contain the memory for the sign system. Its physical size is 73w x 4.5d x 13h inches
and weighs about 34 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle
connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator "MINI" MegaMAX 3000 front sign
This smaller full matrix flip-dot sign has a display of 16 x 112 pixels. This sign is a slave unit and
does
NOT contain the memory for the sign system. Its physical size is 50.5w x 4d x 10h inches
and weighs about 23 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle
connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 3000 Side sign
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 41w x 3.5d x 7.5h inches and weighs
about 17 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

3
Luminator MAX 3000 Side Route Number sign
This full matrix flip-dot sign has a display of 10 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 23w x 4d x 11h inches and weighs
about 11 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 3000 10 x 30 Rear sign
This full matrix flip-dot sign has a display of 10 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 24w x 5d x 12.5h inches and weighs
about 13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 3000 10 x 23 Rear sign
This full matrix flip-dot sign has a display of 10 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs
about 10 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator MAX 3000 7 x 30 Dash sign
This full matrix flip-dot sign has a display of 7 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 26w x 4d x 9.5h inches and weighs
about 10 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
LUMINATOR Products - HORIZON LED Series:
(Hover over or tap each thumbnail image to enlarge)
Luminator Horizon Orange LED Full size front sign
This full matrix LED sign has a display of 16 x 160 pixels. This sign is a slave unit and does NOT
contain the memory for the system. Its physical size is 71.5w x 3.5d x 12h inches and weighs
about 32 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data through-out, and a nylon 796764-1 threaded 4-pin panel
mount receptacle connector which also supplies power to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:
0 in stock.
Available by
pre-order
with deposit.
Luminator Horizon Orange LED Narrow front sign
This full matrix LED sign has a display of 16 x 120 pixels. This sign is a slave unit and does NOT
contain the memory for the system. Its physical size is 55.5w x 3.5d x 12h inches and weighs
about 26 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power & data throughout, and a nylon 796764-1 threaded 4-pin panel mount
receptacle connector which also supplies power to the sign.
Email for Prices, and Shipping & Processing.
Luminator Horizon LED Side sign
Luminator Horizon LED Side Route Number sign
This full matrix LED sign has a display of 16 x 48 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 27w x 3d x 10h inches and weighs
about 8 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator Horizon LED Rear sign - Body Mount, Nylon (plastic) body
This full matrix LED sign has a display of 16 x 48 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 22.5w x 4d x 13h inches and weighs
about 13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator Horizon LED Dash sign
This full matrix LED sign has a display of 12 x 40 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 19w x 3.5d x 7h inches (8h inches boxed)
and weighs about 7 pounds. It uses two nylon 7-pin free hanging receptacle connectors which
supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
This full matrix LED sign has a display of 8 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 53.5w x 3d x 7.5h inches and weighs
about 15 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
VULTRON TransDOT Products - Generation 2:
(Hover over or tap each thumbnail image to enlarge)
Vultron TransDOT Generation 2 Front sign
This full matrix flip-dot sign has a display of 7 x 75 pixels. This sign is a slave unit and does NOT contain the
memory for the sign system. Its physical size is 62w x 7d x 10.5h inches and weighs about 47 pounds. It
features lead wires that attach directly to a power supply, a 9-pin and two 2-pin connectors for the Memory
Module
(sold separately), and two extra 9-pin ports and power connectors for additional signs and their lights.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

3
Vultron TransDOT Generation 2 Side sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does
NOT contain the memory for the sign system. Its physical size is 46w x 5.5d x 10h
inches and weighs about 26 pounds. It uses a single 9-pin quick release plug to supply both data and
power to the sign.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

4
Vultron TransDOT Operator Control / Dialpad
This operator control dialpad has a three digit hexadecimal entry for route destinations and a one digit
hexadecimal entry for 'public relations' messages. Its physical size is 16w x 3.5d x 6h inches and weighs
about 4 pounds. This slave unit plugs directly in to the sign system's Memory Module
(sold separately)
using a 34 pin ribbon wire, and displays the message data on a 16 character LED display.
Email for Prices, and Shipping & Processing.
SINCE PROGRAMMING SOFTWARE FOR THESE SYSTEMS
CAN BE EXPENSIVE OR NO LONGER AVAILABLE, I OFFER A
SERVICE WHERE YOU SEND ME YOUR SIGN'S MEMORY
SOURCE, AND I WILL REPROGRAM IT TO YOUR SPECS AND
SEND IT BACK.
THE COST FOR THIS SERVICE IS AS FOLLOWS:
• $1.00 for each message or P/R code if you need between 1 and 100 codes.
(Note: a $20.00 minimum applies.)
• $0.75 for each message or P/R code if you need between 101 and 500 codes.
• $0.50 for each message or P/R code if you need over 500 codes.

PLUS THE TWO-WAY SHIPPING FOR YOUR MEMORY SOURCE.
Please e-mail for further details.

Some Service Testimonials of my work: ==>
SIGN SYSTEM PROGRAMMING:
PLEASE NOTE:
To offer this service I do have the software to program these signs, BUT because of Copyright
restrictions, I am NOT LEGALLY PERMITTED to sell or give away copies of the software itself.
LUMINATOR Products - Keypads & Accessories:
(Hover over or tap each thumbnail image to enlarge)
Luminator Operator's Display and Keypad - ODK1
This first generation keypad features an LCD yellow backlit screen with a 2 x 20 character display. This unit is
a slave unit and does
NOT contain the memory for the sign system. It features three Molex pin and socket
'quick release' connectors: Two 2-pin for data transfer and one 4-pin to provide power to the unit and to
activate the driver's emergency message feature. Its physical size: 8.5w x 3d x 4.5h inches. Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Luminator Operator's Display and Keypad - ODK2 (Standard facing)
This second generation keypad features a vacuum flourescent screen with a 2 x 20 character display. This unit
is a slave unit and does
NOT contain the memory for the sign system. It features three Molex pin and socket
'quick release' connectors: Two 2-pin for data transfer and one 4-pin to provide power to the unit and to
activate the driver's emergency message feature. Its physical size: 8.5w x 2.5d x 4.5h inches. Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

12
Luminator Operator's Display and Keypad - ODK3
This third generation keypad features a vacuum flourescent screen with a 16 x 128 full matrix display. This
unit DOES contain the memory for the sign system. It uses two nylon 788194-1 threaded 7-pin panel mount
receptacle connectors which supplies both power and data to and from the unit & one 2-pin Molex connector to
activate the driver's emergency message feature. Its physical size: 8.5w x 3d x 4.5h inches. Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

2
Luminator ODK Mounting frame for an RTS bus
This plastic formed frame is compatable with all ODK models shown above. Its back is designed
to conform to the inside of the front destination sign access door of an RTS model bus. If the
back of this frame is flattened, it could conform to other model buses as well. Its physical size
is 9w x 1.5d x 5h inches and weighs less than one pound.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

2
GULTON / LUMINATOR Division Products:
(Hover over or tap each thumbnail image to enlarge)
Gulton / Luminator MAX Side sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does
NOT contain the memory for the sign system. Its physical size is 44w x 4.5d x 7.5h
inches and weighs about 14 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

2
Gulton / Luminator Operator's Control Console
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages. This unit contains the memory for the sign system. Its physical size is 14w x 4.5d x 7h inches
and weighs about 8 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer, and a two
wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

2
Vultron TransDOT Generation 2 Memory Module
This unit is the system memory source for the Vultron TransDOT Generation 2 signs. It features a 9-pin
connector for data transfer, two 2-pin connectors to power the unit, and a 34-pin connector for the ribbon
wire that runs to the operator's dialpad. It also has a 6-pin XLR connector for the Multiple Transfer Unit
(MTU) to download message data. Its physical size is 16w x 3d x 5.5h inches and weighs about 4 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
RESERVED:
Tendered Contract
NUMBER
AVAILABLE:

3
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
CLICK HERE to email for prices,
and shipping & processing.
Luminator Operator's Display and Keypad - ODK2 (Next Stop Announcement facing)
This second generation keypad has the same features and connectors as the ODK2 above, but has the facing
showing the controls for an on-board Passenger Information and Next Stop Announcement system (not
included). It can operate as a stand-alone keypad just like the standard ODK2. This is also a slave unit and does
NOT contain the memory for the sign system. Its physical size: 8.5w x 2.5d x 4.5h inches. Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

57
NEW EQUIPMENT HAS
BEEN ADDED!
Check below for details.
Testimonial for destination sign tech support:
"You were an amazing help getting this piece of Calgary Transit history operational again.
I had my suspicions on how it was wired up, however you were great with walking me
through and making sure that it all worked and I didn't burn the sign down."
Ken Baker from Calgary, Alberta, on assistance with his Vultron TransDot sign.
"Rollsigngallery.com epitomizes good business
practices offering great service at a great price.
Joseph saved our company thousands of dollars
by allowing us to use the existing display
system.  Joseph promised and delivered on fast
turnaround and great looks.  I could not have
asked for more! It was a pleasure and I look
forward to doing business again.  Thanks
Rollsigngallery.com!"
Michael Costable Jr.
White Plains Bus Co., White Plains, NY
Testimonial for a
destination sign sale:
"Thanks for all the help
[and] the quick
responses. Appreciate
the quick, easy
communication."
Yaniv Alfasy,
San Diego, CA.
NUMBER
AVAILABLE:

0
NUMBER
AVAILABLE:
1 in stock.
Available by
pre-order
with deposit.
Twin Vision All LED Destination Sign System - Front Sign
This full matrix LED sign has a display of 16 x 160 pixels Although this sign has its own memory, what shows up
is controlled by the OCU keypad. Its physical size is 65w x 3d x 11.5h inches and weighs about 30 pounds. It
uses a 3-pin molex connector for power and either a 4-pin molex connector or a 4-pin AMP 206429-1 round
receptacle connector for data.
NOTE: This one unit is missing its motherboard back panel, but otherwise works.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
Twin Vision Products:
(Hover over or tap each thumbnail image to enlarge)
CLICK HERE to email for prices,
and shipping & processing.
Axion Operator Console USB Unit - Keypad
This first generation keypad features an LCD yellow backlit screen with a 2 x 20 character display. This
unit DOES contain the memory for the sign system. It features a 12-pin Molex pin and socket 'quick
release' connector that provides power to the unit and for data transfer, and a USB slot on the facing
for a flash card to download new data. Its physical size: 8.5w x 3d x 4.5h inches. Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

0
Axion Technologies Products:
(Hover over or tap each thumbnail image to enlarge)
CLICK HERE to email for prices,
and shipping & processing.
Pledge a donation to help preserve trnsit history!
rollsigngallery@hotmail.com
Find something you like? Have any questions? E-mail me at:
Twin Vision Operator Console Unit - J1708 OCU
This keypad features a vacuum flourescent screen with a 2 x 20 character display. This unit has its own
independent memory and controls the accessed memory on other units. It features a 4-pin Molex pin and
socket 'quick release' connector that provides power to the unit, three RS232 female ports for data transfer,
and a slot on the facing for a flash card to download new data. Its physical size: 8.5w x 2.5d x 4.5h inches.
Weight: 2 pounds.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

1
Twin Vision All LED Destination Sign System - Side Sign
This full matrix LED sign has a display of 14 x 108 pixels Although this sign has its own memory, what shows up
is controlled by the OCU keypad. Its physical size is 45w x 2.5d x 7h inches and weighs about 12 pounds. It
normally uses a 3-pin molex connector for power and either a 4-pin molex connector or a 4-pin AMP 206429-1
round receptacle connector for data, but the connectors are missing, leaving the bare wires. When hooked up,
the signs still function as designed.
Email for Prices, and Shipping & Processing.
NUMBER
AVAILABLE:

6
COLOURED NUMBER CODES:
FF0000 = 0  RED (Bright Red)
FFCC00 = 1  ORANGE (Pumpkin Spice)
FFFF99 = 2  YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)