| YOUR SOURCE FOR PREVIOUSLY ENJOYED ELECTRONIC SIGNS & AFTER MARKET PARTS. (Click on a tab below to switch store departments. The GREEN tab is the department you're in now.) |
| (Hover over or tap each thumbnail image to enlarge) |
Gulton First Generation Front sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 54.75w x 4d x 8.75h
inches and weighs about 26 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
slave unit and does NOT contain the memory for the sign system. Its physical size is 54.75w x 4d x 8.75h
inches and weighs about 26 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Find something you like? Have any questions? E-mail me at:
COLOURED NUMBER CODES:
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
GULTON INDUSTRIES First Generation Signs:
Gulton First Generation Side sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 40.5w x 4.5d x 8.5h
inches and weighs about 24 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
slave unit and does NOT contain the memory for the sign system. Its physical size is 40.5w x 4.5d x 8.5h
inches and weighs about 24 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator MAX Front sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 53.5w x 5d x 9.5h
inches and weighs about 25 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
slave unit and does NOT contain the memory for the sign system. Its physical size is 53.5w x 5d x 9.5h
inches and weighs about 25 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 1 |
Gulton / Luminator Operator's Control Console (Touch Pad Facing)
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages, using membrane "touch pad" buttons to enter the code numbers. The unit contains the memory
for the sign system. Its physical size is 13w x 3.5d x 6h inches and weighs about 5.5 pounds. It uses
a 26-pin, 2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
messages, using membrane "touch pad" buttons to enter the code numbers. The unit contains the memory
for the sign system. Its physical size is 13w x 3.5d x 6h inches and weighs about 5.5 pounds. It uses
a 26-pin, 2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator MAX Side sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 44w x 4.5d x 7.5h
inches and weighs about 14 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
slave unit and does NOT contain the memory for the sign system. Its physical size is 44w x 4.5d x 7.5h
inches and weighs about 14 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer,
and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 2 |
| (Hover over or tap each thumbnail image to enlarge) |
GULTON / LUMINATOR MAX Series Signs:
| (Hover over or tap each thumbnail image to enlarge) |
Luminator LIDS IV - Flipdot Front Sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character (each character
on its own circuit board inside). This sign is a slave unit and does NOT contain the memory for the
sign system. Its physical size is 53.25w x 5.25d x 8h inches and weighs about 27.5 pounds. It uses a
25-pin, DB25 (parallel port) male connector for data transfer to the Control Console through a special
DB25 female to 2.54mm pitch female connector ribbon cable, two DB25 female connectors for data
transfer to the side sign and others, and a two wire male connector for the flourescent light power.
Email for Prices, and Shipping & Processing.
on its own circuit board inside). This sign is a slave unit and does NOT contain the memory for the
sign system. Its physical size is 53.25w x 5.25d x 8h inches and weighs about 27.5 pounds. It uses a
25-pin, DB25 (parallel port) male connector for data transfer to the Control Console through a special
DB25 female to 2.54mm pitch female connector ribbon cable, two DB25 female connectors for data
transfer to the side sign and others, and a two wire male connector for the flourescent light power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
LUMINATOR LIDS IV Signs:
Gulton / Transign TransDot Hybrid Front sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 53.5w x 5d x 9.5h
inches and weighs about 25 pounds. It uses a 4 lead slot connector for power in to the light, and a 9-pin
quick release plug with cable for data and power transfer to and from the conversion unit (sold separately)
with two 9-pin outgoing ports for connections to other signs.
Email for Prices, and Shipping & Processing.
slave unit and does NOT contain the memory for the sign system. Its physical size is 53.5w x 5d x 9.5h
inches and weighs about 25 pounds. It uses a 4 lead slot connector for power in to the light, and a 9-pin
quick release plug with cable for data and power transfer to and from the conversion unit (sold separately)
with two 9-pin outgoing ports for connections to other signs.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 2 |
Gulton / Transign TransDot Hybrid Conversion Unit
This conversion unit is designed to allow Gulton / Luminator Control Consoles to operate the Transign
TransDot signs. One side uses a 26-pin, 2.54mm pitch male connector for data transfer from the Control
Console. The other side uses a 9-pin quick release plug for power and data transfer to the signs, and a two
wire male connector of the same style as on the Control Consoles to introduce power to the signs. NOTE:
These conversion units may NOT work with Vultron TransDot signs! Check wiring compatibility before use!
Email for Prices, and Shipping & Processing.
TransDot signs. One side uses a 26-pin, 2.54mm pitch male connector for data transfer from the Control
Console. The other side uses a 9-pin quick release plug for power and data transfer to the signs, and a two
wire male connector of the same style as on the Control Consoles to introduce power to the signs. NOTE:
These conversion units may NOT work with Vultron TransDot signs! Check wiring compatibility before use!
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 2 |
| (Hover over or tap each thumbnail image to enlarge) |
GULTON / TRANSIGN TRANSDOT Hybrid Series Signs:
| (Hover over or tap each thumbnail image to enlarge) |
GULTON / LUMINATOR Control Consoles:
Gulton / Luminator Operator's Control Console (Dial Pad Facing)
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages, using a raised dialpad to enter the code numbers. The unit contains the memory for the
sign system. Its physical size is 13w x 4d x 6h inches and weighs about 5.75 pounds. It uses a 26-pin,
2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
messages, using a raised dialpad to enter the code numbers. The unit contains the memory for the
sign system. Its physical size is 13w x 4d x 6h inches and weighs about 5.75 pounds. It uses a 26-pin,
2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator Operator's Control Console (Button Grid Facing)
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages, using a grid of numbered push buttons to enter each code number. It also contains the memory
for the sign system. Its physical size is 13w x 3.5d x 6h inches and weighs about 5.5 pounds. It uses a
26-pin, 2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
messages, using a grid of numbered push buttons to enter each code number. It also contains the memory
for the sign system. Its physical size is 13w x 3.5d x 6h inches and weighs about 5.5 pounds. It uses a
26-pin, 2.54mm pitch male connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator Operator's Control Console (Dash Mounted Unit)
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages with a touch pad facing. This unit is designed with a more contoured body and has brackets
that attach to the back which allow for mounting the console to the dashboard of the vehicle. It contains
the memory for the sign system. The physical size of the console alone is 13w x 3.25d x 5.75h inches and
weighs about 5 pounds. With the brackets attached and making it sit in a triangle orientation, it's physical
size / displacement is 13w x 5.5d x 5.5h and weighs about 6 pounds. It uses a 26-pin, 2.54mm pitch male
connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
messages with a touch pad facing. This unit is designed with a more contoured body and has brackets
that attach to the back which allow for mounting the console to the dashboard of the vehicle. It contains
the memory for the sign system. The physical size of the console alone is 13w x 3.25d x 5.75h inches and
weighs about 5 pounds. With the brackets attached and making it sit in a triangle orientation, it's physical
size / displacement is 13w x 5.5d x 5.5h and weighs about 6 pounds. It uses a 26-pin, 2.54mm pitch male
connector for data transfer, and a two wire male connector to power the unit.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator Operator's Control Console (Modern "Slim" Unit)
This operator control keypad has a four digit decimal entry for route destinations and 'public relations'
messages with a touch pad facing. This unit is a redesign of the previous models with a slimmer profile
and upgraded 256k memory as the source for the sign system. Its physical size is 16w x 1.5d x 6.5h inches
and weighs about 3.25 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer, and a five
pin molex connector to power the unit and provide emergency message activation.
Email for Prices, and Shipping & Processing.
messages with a touch pad facing. This unit is a redesign of the previous models with a slimmer profile
and upgraded 256k memory as the source for the sign system. Its physical size is 16w x 1.5d x 6.5h inches
and weighs about 3.25 pounds. It uses a 26-pin, 2.54mm pitch male connector for data transfer, and a five
pin molex connector to power the unit and provide emergency message activation.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator LIDS IV - Flipdot Side Sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character (each character
on its own circuit board inside). This sign is a slave unit and does NOT contain the memory for the
sign system. Its physical size is 39.5w x 5d x 8h inches and weighs about 20 pounds. It uses two
DB25 (parallel port) female connectors for data transfer from the front sign to this sign, and from
this sign to others. It also has a two wire male connector for the flourescent light power.
Email for Prices, and Shipping & Processing.
on its own circuit board inside). This sign is a slave unit and does NOT contain the memory for the
sign system. Its physical size is 39.5w x 5d x 8h inches and weighs about 20 pounds. It uses two
DB25 (parallel port) female connectors for data transfer from the front sign to this sign, and from
this sign to others. It also has a two wire male connector for the flourescent light power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
Gulton / Luminator MAX Front Split sign (3 / 8x14 9" + 15 / 5x7 6.5")
| NUMBER AVAILABLE: 0 |
This flip-dot sign set has a route number display of three 5x7 pixel characters with a 9 inch display height,
and a destination display of fifteen 5x7 pixel characters with a 6.5 inch display height (same as the stand
alone front sign). A special bracket holds the two parts of this sign set together. This sign set is a slave
unit and does NOT contain the memory for the sign system. Its physical size is 73.5w x 5d x 14h inches and
weighs about 30 pounds/ (The dimensions include the special center bracket.) It uses a 26-pin, 2.54mm
pitch male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
and a destination display of fifteen 5x7 pixel characters with a 6.5 inch display height (same as the stand
alone front sign). A special bracket holds the two parts of this sign set together. This sign set is a slave
unit and does NOT contain the memory for the sign system. Its physical size is 73.5w x 5d x 14h inches and
weighs about 30 pounds/ (The dimensions include the special center bracket.) It uses a 26-pin, 2.54mm
pitch male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
Gulton / Luminator MAX Side Split sign (3 / 5x7 6.5" + 15 / 5x7 3")
This flip-dot sign set has a route number display of three 5x7 pixel characters with a 6.5 inch display height,
and a destination display of fifteen 5x7 pixel characters with a 3 inch display height (same type as the stand
alone side sign). A special bracket holds the two parts of this sign set together. This sign set is a slave unit
and does NOT contain the memory for the sign system. Its physical size is 55.5w x 6.25d x 12.25h inches and
weighs about 23 pounds. (The dimensions include the special center bracket.) It uses a 26-pin, 2.54mm
pitch male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
and a destination display of fifteen 5x7 pixel characters with a 3 inch display height (same type as the stand
alone side sign). A special bracket holds the two parts of this sign set together. This sign set is a slave unit
and does NOT contain the memory for the sign system. Its physical size is 55.5w x 6.25d x 12.25h inches and
weighs about 23 pounds. (The dimensions include the special center bracket.) It uses a 26-pin, 2.54mm
pitch male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator MAX Rear sign - 4 Character
This flip-dot sign has a 4 character display with a 5 x 7 pixel grid for each character. The display height
is about 6.5 inches This sign is a slave unit and does NOT contain the memory for the sign system. Its
physical size is 22w x 5d x 12h inches and weighs about 10 pounds. It uses a 26-pin, 2.54mm pitch
male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
is about 6.5 inches This sign is a slave unit and does NOT contain the memory for the sign system. Its
physical size is 22w x 5d x 12h inches and weighs about 10 pounds. It uses a 26-pin, 2.54mm pitch
male connector for data transfer, and a two wire male connector for the flourescent tube power.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Gulton / Luminator MAX Large Rear sign - 3 Character (Interior / Back Window)
This flip-dot sign has a 3 character display with an 8 x 14 pixel grid for each character. The display height is
about 9 inches. This sign is a slave unit and does NOT contain the memory for the sign system. Its physical
size is 23w x 5.75d x 15h inches & weighs about 12.5 pounds. It uses a 26-pin, 2.54mm pitch male connector
for data transfer, and a two wire male connector for the flourescent tube power. (Note: These rear signs
may also be compatible with Luminator brand front signs if the correct System Processor board is inside.)
Email for Prices, and Shipping & Processing.
about 9 inches. This sign is a slave unit and does NOT contain the memory for the sign system. Its physical
size is 23w x 5.75d x 15h inches & weighs about 12.5 pounds. It uses a 26-pin, 2.54mm pitch male connector
for data transfer, and a two wire male connector for the flourescent tube power. (Note: These rear signs
may also be compatible with Luminator brand front signs if the correct System Processor board is inside.)
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
| (Including LUMINATOR LIDS and TRANSIGN/GULTON Hybrid signs) |
| (Including Pocatec Ltee. signs) |
| EXTRA SERVICES OFFERED |
| EXTRA SERVICES OFFERED |
