| YOUR SOURCE FOR PREVIOUSLY ENJOYED ELECTRONIC SIGNS & AFTER MARKET PARTS. (Click on a tab below to switch store departments. The GREEN tab is the department you're in now.) |
Luminator GTI MegaMAX Full size Front Sign - 16 x 112
This full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign
system. Its physical size is 73w x 6d x 13h inches and weighs about 48 pounds. It uses four Molex pin
and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply power
to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
system. Its physical size is 73w x 6d x 13h inches and weighs about 48 pounds. It uses four Molex pin
and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply power
to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
LUMINATOR Products - GTI MAX Series:
| (Hover over or tap each thumbnail image to enlarge) |
| NUMBER AVAILABLE: 0 |
Luminator GTI MAX Front Sign - 7 x 90 (Full)
This full matrix flip-dot sign has a display of 7 x 90 pixels and contains the memory for the sign
system. Its physical size is 56.5w x 7d x 10.5h inches and weighs about 32 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
system. Its physical size is 56.5w x 7d x 10.5h inches and weighs about 32 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 1 |
Luminator GTI MAX Side Sign - 7 x 75 (Small)
This full matrix flip-dot sign has a display of 7 x 75 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 2 |
Luminator GTI MAX Side Sign - 7 x 90 (Full)
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
19 pounds. It uses three Molex pin and socket 'quick disconnect' wire connectors: Two 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator GTI MAX Rear Sign - Window Mount - 7 x 23
This full matrix flip-dot sign has a display of 7 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 20w x 7d x 10.5h inches and weighs about
14 pounds. It uses two Molex pin and socket 'quick disconnect' wire connectors: One 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 20w x 7d x 10.5h inches and weighs about
14 pounds. It uses two Molex pin and socket 'quick disconnect' wire connectors: One 2-pin for data
transfer and one 3-pin to supply power to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
LUMINATOR Products - MAX 2000 Series:
| (Hover over or tap each thumbnail image to enlarge) |
Luminator MegaMAX 2000 Full Size Front Sign - 16 x 112
This larger full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign system.
Its physical size is 73w x 7d x 13h inches and weighs about 49 pounds. It uses two thermoplastic 211401-1
threaded 7-pin panel mount connectors which supplies both power and data throughout, and a thermoplastic
206705-1 threaded 9-pin panel mount connector which supplies power and data to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
Its physical size is 73w x 7d x 13h inches and weighs about 49 pounds. It uses two thermoplastic 211401-1
threaded 7-pin panel mount connectors which supplies both power and data throughout, and a thermoplastic
206705-1 threaded 9-pin panel mount connector which supplies power and data to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator GTI "MINI" MegaMAX Front Sign - 16 x 112
This full matrix flip-dot sign has a display of 16 x 112 pixels and contains the memory for the sign
system. Its physical size is 50w x 7d x 10.5h inches and weighs about 34 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
system. Its physical size is 50w x 7d x 10.5h inches and weighs about 34 pounds. It uses four Molex
pin and socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply
power to the sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 2000 Side Sign - 7 x 90
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
20 pounds. It uses two nylon 7-pin free hanging receptacle connectors which supplies both power and
data to and from the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 43w x 5d x 9.5h inches and weighs about
20 pounds. It uses two nylon 7-pin free hanging receptacle connectors which supplies both power and
data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 2000 Rear sign - Body Mount - 7 x 23
This full matrix flip-dot sign has a display of 7 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs about
13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector which
supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs about
13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector which
supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
LUMINATOR Products - MAX 3000 Series:
| (Hover over or tap each thumbnail image to enlarge) |
Luminator MegaMAX 3000 Full Size Wide Front Sign - 16 x 112
This larger and wider full matrix flip-dot sign has a display of 16 x 112 pixels. This sign is a slave
unit and does NOT contain the memory for the sign system. Its physical size is 73w x 4.5d x 12.5h
inches and weighs about 34 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount
receptacle connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
unit and does NOT contain the memory for the sign system. Its physical size is 73w x 4.5d x 12.5h
inches and weighs about 34 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount
receptacle connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator "MINI" MegaMAX 3000 Front Sign - 16 x 112
This smaller full matrix flip-dot sign has a display of 16 x 112 pixels. This sign is a slave unit and
does NOT contain the memory for the sign system. Its physical size is 50.5w x 4d x 10h inches
and weighs about 23 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle
connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
does NOT contain the memory for the sign system. Its physical size is 50.5w x 4d x 10h inches
and weighs about 23 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle
connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 3000 Side Sign - 7 x 90
This full matrix flip-dot sign has a display of 7 x 90 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 41w x 3.5d x 7.5h inches and weighs
about 17 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 41w x 3.5d x 7.5h inches and weighs
about 17 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 2 |
Luminator MAX 3000 Side Route Number Sign - 10 x 30
This full matrix flip-dot sign has a display of 10 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 23w x 4d x 11h inches and weighs
about 11 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 23w x 4d x 11h inches and weighs
about 11 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 3000 10 x 30 Rear Sign
This full matrix flip-dot sign has a display of 10 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 24w x 5d x 12.5h inches and weighs
about 13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 24w x 5d x 12.5h inches and weighs
about 13 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 3000 10 x 23 Rear Sign
This full matrix flip-dot sign has a display of 10 x 23 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs
about 10 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 22.5w x 5d x 12h inches and weighs
about 10 pounds. It uses a single nylon 788194-1 threaded 7-pin panel mount receptacle connector
which supplies both power and data to the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
Luminator MAX 3000 7 x 30 Dash Sign
This full matrix flip-dot sign has a display of 7 x 30 pixels. This sign is a slave unit and does NOT
contain the memory for the sign system. Its physical size is 26w x 4d x 9.5h inches and weighs
about 10 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
contain the memory for the sign system. Its physical size is 26w x 4d x 9.5h inches and weighs
about 10 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount receptacle connectors
which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
| RESERVED: Tendered Contract |
Find something you like? Have any questions? E-mail me at:
COLOURED NUMBER CODES:
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
Luminator GTI MAX Split / Two-Piece Front Sign
This full matrix flip-dot sign set has a route number display of 14 x 28 pixels and a destination display
of 7 x 75 pixels, and contains the memory for the sign system. Its overall physical size is 69w x 6.5d x 12h
inches (14 inches high over the center bracket) and weighs about 38 pounds. It uses four Molex pin and
socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply power to the
sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
of 7 x 75 pixels, and contains the memory for the sign system. Its overall physical size is 69w x 6.5d x 12h
inches (14 inches high over the center bracket) and weighs about 38 pounds. It uses four Molex pin and
socket 'quick disconnect' wire connectors: Two 2-pin for data transfer, one 3-pin to supply power to the
sign, and one 4-pin to supply power from the sign to the ODK (sold separately).
Email for Prices, and Shipping & Processing.
| NUMBER AVAILABLE: 0 |
| Quantity numbers are temporarily disabled. Please email for availability. |
| Quantity numbers are temporarily disabled. Please email for availability. |
| NUMBER AVAILABLE: 0 |
Luminator MegaMAX 3000 Full Size Narrow Front Sign - 16 x 98
This larger but narrower full matrix flip-dot sign has a display of 16 x 112 pixels. This sign is a slave
unit and does NOT contain the memory for the sign system. Its physical size is 66w x 4.5d x 12.5h
inches and weighs about 32 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount
receptacle connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
unit and does NOT contain the memory for the sign system. Its physical size is 66w x 4.5d x 12.5h
inches and weighs about 32 pounds. It uses two nylon 788194-1 threaded 7-pin panel mount
receptacle connectors which supplies both power and data to and from the sign.
Email for Prices, and Shipping & Processing.
| (Including LUMINATOR LIDS and TRANSIGN/GULTON Hybrid signs) |
| (Including Pocatec Ltee. signs) |
| EXTRA SERVICES OFFERED |
| EXTRA SERVICES OFFERED |
