YOUR SOURCE FOR PREVIOUSLY ENJOYED ELECTRONIC SIGNS & AFTER MARKET PARTS. (Click on a tab below to switch store departments. The GREEN tab is the department you're in now.)
|
VULTRON TransDOT Products - Generation 2:
(Hover over or tap each thumbnail image to enlarge)
|
Vultron TransDOT Generation 2 Front sign
This full matrix flip-dot sign has a display of 7 x 75 pixels. This sign is a slave unit and does NOT contain the
memory for the sign system. Its physical size is 62w x 7d x 10.5h inches and weighs about 47 pounds. It
features lead wires that attach directly to a power supply, a 9-pin and two 2-pin connectors for the Memory
Module (sold separately), and two extra 9-pin ports and power connectors for additional signs and their lights.
Email for Prices, and Shipping & Processing.
Vultron TransDOT Generation 2 Side sign
This flip-dot sign has a 15 character display with a 5 x 7 pixel grid for each character. This sign is a
slave unit and does NOT contain the memory for the sign system. Its physical size is 46w x 5.5d x 10h
inches and weighs about 26 pounds. It uses a single 9-pin quick release plug to supply both data and
power to the sign.
Email for Prices, and Shipping & Processing.
Vultron TransDOT Operator Control / Dialpad
This operator control dialpad has a three digit hexadecimal entry for route destinations and a one digit
hexadecimal entry for 'public relations' messages. Its physical size is 16w x 3.5d x 6h inches and weighs
about 4 pounds. This slave unit plugs directly in to the sign system's Memory Module (sold separately)
using a 34 pin ribbon wire, and displays the message data on a 16 character LED display.
Email for Prices, and Shipping & Processing.
Vultron TransDOT Generation 2 Memory Module
This unit is the system memory source for the Vultron TransDOT Generation 2 signs. It features a 9-pin
connector for data transfer, two 2-pin connectors to power the unit, and a 34-pin connector for the ribbon
wire that runs to the operator's dialpad. It also has a 6-pin XLR connector for the Multiple Transfer Unit
(MTU) to download message data. Its physical size is 16w x 3d x 5.5h inches and weighs about 4 pounds.
Email for Prices, and Shipping & Processing.
Find something you like? Have any questions? E-mail me at:
COLOURED NUMBER CODES:
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
Vultron Display Technologies - LED Front Sign
This full matrix LED sign has a display of 16 x 128 pixels. This sign is a slave unit and does NOT contain the
memory for the sign system. Its physical size is 65w x 2.5d x 11.5h inches and weighs about 36 pounds. It
uses 2-pin blade connector to provide power to the sign, and a 9-pin quick release plug to supply data to
the front sign from the keypad.
Email for Prices, and Shipping & Processing.
Vultron Display Tech. - Onboard Bus Controller with Front Load
This operator control unit has a full hexadecimal keypad, and features an LCD yellow backlit screen
with a 2 x 20 character display. This unit DOES contain the memory for the sign system. It uses a 9-pin
quick release plug to supply both data and power to the keypad. Its physical size is 8.5w x 3d x 5h inches
and weighs about 3 pounds.
Email for Prices, and Shipping & Processing.
VULTRON Display Technologies - LED Signs:
(Hover over or tap each thumbnail image to enlarge)
|
Quantity numbers are temporarily disabled. Please email for availability.
|
Quantity numbers are temporarily disabled. Please email for availability.
|
Quantity numbers are temporarily disabled. Please email for availability.
|
(Including LUMINATOR LIDS and TRANSIGN/GULTON Hybrid signs)
|
(Including Pocatec Ltee. signs)
|