| With these conversions, I don't just throw things together, I make it SAFE. This includes removing older power connectors whose plastic bodies are brittle, weak and compromised, and replacing them with safe modern connectors that are manufactured in the same way as what are used in everyday electronics. They're also installed with fully protected connections or interior connections so that there's no exposed power anywhere on the outside of the sign. I do this with ALL the sign conversions I do. SAFE CONVERSIONS. |
| YOUR SOURCE FOR PREVIOUSLY ENJOYED ELECTRONIC SIGNS & AFTER MARKET PARTS. (Click on a tab below to switch store departments. The GREEN tab is the department you're in now.) |
COLOURED NUMBER CODES:
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
FF0000 = 0 RED (Bright Red)
FFCC00 = 1 ORANGE (Pumpkin Spice)
FFFF99 = 2 YELLOW (Pale Yellow)
99FF99 = 3+ GREEN (Misty Green)
Destination Sign Conversion to Operate on 110 Volt (House) Power
For an additional charge, ANY of the signs offered for sale can be converted to run directly
on 110 volt house power. Simply plug in and go! No external power supplies needed!
Click or tap the links below to see previous conversion projects from start to finish. Green text is the example shown.
For an additional charge, ANY of the signs offered for sale can be converted to run directly
on 110 volt house power. Simply plug in and go! No external power supplies needed!
Click or tap the links below to see previous conversion projects from start to finish. Green text is the example shown.
Gulton 15 Character Front Flipdot
Find something you like? Have any questions? E-mail me at:
This sign rebuild is going GREAT! I always check my work as I go.
I've finished altering the front half of the sign and removed some
redundant parts for the modification. Because the mods very
slightly changed the dynamics of the body as a whole I wanted to
test it to make sure it all will go back together as it was.
EVERYTHING WORKS PERFECTLY! Time to take it back apart and
thoroughly clean the inside to prepare it for its new internal lighting.
I've finished altering the front half of the sign and removed some
redundant parts for the modification. Because the mods very
slightly changed the dynamics of the body as a whole I wanted to
test it to make sure it all will go back together as it was.
EVERYTHING WORKS PERFECTLY! Time to take it back apart and
thoroughly clean the inside to prepare it for its new internal lighting.
This was the reaction posted on Facebook:
"I'm fortunate to have some great friends who love
transit as much as I do. Will H. is one of them.
He got me this amazing old flipdot front destination
sign from a bus (from Rollsign Gallery) as an early
Christmas gift! This is the coolest and nicest thing
anyone has given me for the International Micro
Museum of Transit collection! "
Jerome A. H. - Indianapolis, IN
"I'm fortunate to have some great friends who love
transit as much as I do. Will H. is one of them.
He got me this amazing old flipdot front destination
sign from a bus (from Rollsign Gallery) as an early
Christmas gift! This is the coolest and nicest thing
anyone has given me for the International Micro
Museum of Transit collection! "
Jerome A. H. - Indianapolis, IN
| Starting on yet another sign modification converting to run on house power! This one is a Gulton/Luminator 15 character flipdot sign. People LOVE them! |
Took a little longer than expected to set the new LED lighting since
it all had to be tested for brightness angle then measured along its
alignment instead of following a body line, but I finally got it in and
it looks great lit up! Next step is to set all the interior hard wiring.
it all had to be tested for brightness angle then measured along its
alignment instead of following a body line, but I finally got it in and
it looks great lit up! Next step is to set all the interior hard wiring.
| Want one of your own? Click or tap this link to email for more info. → |
| The final product looks and works amazing! I kept the sign as original as possible, except for rewiring it to run directly on house power. The only interior change that was needed for that, was to remove the florescent tube lighting and ballast and replace it with low power LED lighting (a requirement). Other than that everything inside is as it was, as requested. |
| (Including LUMINATOR LIDS and TRANSIGN/GULTON Hybrid signs) |
| (Including Pocatec Ltee. signs) |
| EXTRA SERVICES OFFERED |
| EXTRA SERVICES OFFERED |
